Scanning with Auditory Prompting on, provides not only a visual cue but an auditory cue to indicate where the scan is currently. If you are scanning, simply activate your switch. To retrieve a message, activate the switch again after you have heard the prompt.
Prompt Destination
You can hear prompts through the device's speaker. You can also plug stereo headphones into the Headphone jack on the side of the case. This allows you, but not others, to hear the prompts. If you are using headphones, choose the Earphone option.
Prompt Type
When Auditory Prompts are turned On, your device defaults to speaking the label of any button you activate. This is whatever the label is that has been assigned to a specific button. If you changed a label during the storing process, the prompt will be whatever you changed the label to. For example, you may have changed the UMBRELLA label to "Weather." The prompt will be "Weather" in that case.
Edit Row Prompt
Right click on the first button in the row, choose Edit Row Prompt from the drop down menu and add the appropriate prompt for that row. Otherwise, the prompt will be spoken as “Row 1”, “Row 2”, etc.
Content tells your device to speak whatever message is stored on the button.
Prompt Substitution
If prompts are set to Label and the button doesn’t have a label it will use whatever substitution is chosen here. The Substitution is also used for Rows when Row/Column Scanning.
Earphone Volume
Determines how loud the prompt is when using an earphone or headset.